ST 032 Multifunctional Detection Instrument

::user`s manual ::software

	The ST 032 Multifunctional Detection Instrument is used to detect and locate various appliances used for furtive acquisition of information (hereinafter called 'Special Technical Means', or 'STM'), to reveal natural and artificial channels of information leakage, and to monitor the level of information security.
Guide the index at an interesting component

The instrument consists of the Main Control and Indication Unit, and a set of Transducers, and is capable of operating in the following modes:

• HF detector/frequency meter, with the identification of GSM and DECT signals;
  - identification of GSM and DECT signals;
  - differential mode;
  - control of the scanning receiver.

  conducting line analyser;

  infrared detector;

  low frequency magnetic field detector;

  differential low frequency amplifier;

  acoustic vibration transducer*;

  acoustic transducer *;

  control of the conducting line scanning receiver (AOR8000, 8200, 5000);
  * - optional

 

The information is displayed on a liquid crystal screen.
Sound output is available via headphones or speaker.
ST 032 can be powered from 1 type AA battery, or a power unit. ST 032 is a portable unit. For handling and storage a special bag is used, tailored to house all the components in a convenient way.

 

 

Specifications
Radio frequency detector-frequency meter
Operating frequency range, MHz	30-2500
Sensitivity at input, mV	<1 (30MHz-1000MHz)
	<4 (1000MHz-1800MHz)
Dynamic range, dB	63
Frequency meter sensitivity, mV	<15
Frequency measurements accuracy, MHz	+ 0.01
Conductive wire lines scanning analyzer
Scanning range, MHz	0.05-9
Sensitivity for signal/noise ratio 10 dB, mV	<1
Band width, kHz	10
Detection modes	AM, FM
Allowable mains voltage, V	600
Infrared radiation detector
Spectral range, nm	770-1000
Band width of detection, MHz	0.3-300
Threshold sensitivity, W/Hz1/2	10-13
Low frequency magnetic fields detector
Frequency range, kHz	0.5-300
Threshold sensitivity, T/Hz1/2	10-11
Vibro-acoustic converter
Frequency range, kHz	0.3-6
Sensitivity, V*s2/m	1
Acoustic converter
Frequency range, kHz	0.3-8
Sensitivity, mV/Pa	>5
Low frequency differential amplifier
Normalized noise voltage at the input, uV	<2
Dynamic range, dB	60
Input impedance, kOhm	200
Common-mode interference damping factor, dB	>60
Frequency range, kHz	0.2-15
Maximum allowable input voltage, V	70
Power
Power supply (DC), V	1.5 (1 battery, AA type)/220
Maximum consumed current, mA	<200
Consumed current in operating mode, mA	<100
Dimensions and weight
The principal control, processing and indication unit: overall dimensions, mm	157И62И28
The principal control, processing and indication unit: weight, kg	0.25
Complete set: overall dimensions, mm
Complete set: weight, kg	1

The complete set of the instrument includes the following components:
Name	pieces
1. Principal Control, Processing, and Indication Unit.	1
2. Adapter for the Conducting Line Scanning Analyser	1
3. Cable for the LF Differential Amplifier.	1
4. Acoustic Vibration Sensor*.	1
5. Acoustic Sensor*.	1
6. Needle Type Extensions (2pcs.).	2
7. "220" type extensions.	2
8. "Alligator" clip type extensions.	2
9. Headphones.	1
10. Cable for connection to IBM PC and scanning receiver.	1
11. Power Supply Unit.	1
12. бб Battery.	1
13. Technical Description and Operating Manual.	1
14. Packaging Bag.	1

* Optional item to be ordered separately.