ST 062 Selective Detector of Digital Transmitters

:: Specifications and User's Guide :: Software

The ST 062 is intended for detecting and identifying standard cellular transmitters and wireless data transmitters. Standard Devices GSM 900/1800 UMTS (3G) WI FI Bluetooth GSM and 3G cellular phones and modems WiFi and wireless video cameras operating a a frequency of 2.4 GHz Bluetooth hands-free sets The ST 062 also displays the Base Stations power signal strength and data exchange intensity. By the principle of its operation, the ST 062 is a digitally controlled direct-conversion receiver with a color OLED display. To detect signals, the ST 062 scans a series of frequency ranges of the known transmission standards. The user can set up the detection threshold and the number of desired frequency bands.

Automatic Mode

In Automatic mode, the ST 062 detects signals above the selected threshold and saves them in the Events Log.

	1	Selected mode.
	2	Record protect mode. Indicates that events will not be logged. The reading changes to '000,' if the user enables logging.
	3	Signal strength in dB.
	4	9—GSM 900 18—GSM 1800 3G—3G (UMTS) W—WiFi (WLAN) BT—Bluetooth DT—DECT 24—Devices, other than WLAN and Bluetooth, operating at 2.4 GHz (for example, wireless surveillance cameras, microwave ovens, etc.).

The bottom line of the screen displays abbreviated symbols for the digital data transmissions modes selected by the user.

The ST 062 can be scheduled to operate completely autonomously.

Manual Mode

Displays signal strength, time diagram, and base station tower levels. This mode is intended for the detection of

- the location of mobile devices;
- threshold levels for use in Automatic Mode.

1

Indicates that the signals of only mobile devices will be displayed. The symbol changes to «B» when you choose to view base station tower signals.

Log View Mode

In this mode, you can view the events registered by the ST 062 during Automatic Mode. The following data is displayed:

— Time of event
— Duration of event
— Type of event
— Signal strength.

The ST 062 can hold 30 banks of up to 999 events each.

	1	Current bank / total number of the bank
	2	Current event number / total number of events in the bank
	3	Signal strength in dB
	4	Signal type

Additional Features

• Built-in Relay (terminals on the external port)
Extends the functionality of the ST 062 to remotely switch jammers and additional indicators "ON" and "OFF".
• External port for connecting additional antenna amplifiers.
• Original software allows you to:
• view real-time graphs of the operation of the ST 062, or view the events collected during Automatic Mode, on a computer display;
• create a database of logged events;
• operate the device directly from a computer via a USB port.

• Software and firmware updates are available on the web site.
This allows you to quickly add or change the frequency bands, depending on the standards of your area.